COROZINC M is a primer specially designed for use with permanent water exposure (steel hydraulic engineering). Contains 92 % metallic zinc. Moisture-curing zinc dust primers PU are significantly more elastic than conventional 1- and 2-component zinc dust primers. This means, especially with higher coating thicknesses, much higher mechanical resistance. COROZINC M can be painted over with any saponification-resistant 1K or 2K system (no alkyd resins). COROZINC M can also be used as a shop primer.

COROPUR 1K-FH intermediate micaceous iron coating is primarily used, in combination with moisture-curing systems, as an intermediate coating in corrosion protection systems from corrosivity category C3. The special, lamellar structure of the iron mica pigmentation, in combination with the PU binder, results in coatings with excellent water and corrosion resistance. COROPUR can be applied by airless application to vertical surfaces with a dry film thickness of up to 150 µm.

ECLON PUR HS is an extremely extensive, thick layer 2-component PUR coating with good resistance properties. Excellent adhesion to various substrates. The essential advantages at a glance: Economically extremely interesting thanks to high solid matter (less VOC steering charge, environmentally friendly) – Rational processing: rapid drying even at low temperatures – Excellent durability, no run-off, even with thick layers. – Resistant to water, acids, alkalis, washing lye, etc. – Good UV resistance with Hardener AL respectively Hardener AL FLUID .

ECLADUR WR 2K-PUR silky gloss is an extremely light and weather resistant high performance top coat. Can also be applied at low temperatures and high humidity - usually directly on the object - without any problems. The rapid drying and curing of the coating film enables the coated objects to be manipulated quickly and therefore shortens the service life.
Excellent weather resistance thanks to
very high colour fastness
very high gloss retention
as well as very nice flow and good workability.

ECLADUR WR 2K-PUR gloss is an extremely light and weather resistant high performance top coat. Can also be applied at low temperatures and high humidity - usually directly on the object - without any problems. The rapid drying and curing of the coating film enables the coated objects to be manipulated quickly and therefore shortens the service life.
Excellent weather resistance thanks to
very high colour fastness
very high gloss retention
as well as very nice flow and good workability.

ECLON PUR ACR 2K-enamel silk gloss is a two-component paint based on polyurethane resin. ECLON PUR ACR is especially characterized by high resistance to moisture, salt, industrial dirt, solvents and many chemicals. In addition to its excellent weather and chemical resistance, ECLON PUR ACR has the following properties: Good filling power / No wrinkling / No yellowing / No bubble formation, even with thicker layers / Efficient working thanks to fast drying even at low temperatures (5 °C), thus fast masking and higher productivity. Approval Type «W» (chemical industry approval) according to BN 108/109 in the systems «WBZ» and «WBR».

ECLON PUR ACR 2K-enamel gloss is a two-component paint based on polyurethane resin. ECLON PUR ACR is especially characterized by high resistance to moisture, salt, industrial dirt, solvents and many chemicals. In addition to its excellent weather and chemical resistance, ECLON PUR ACR has the following properties: Good filling power / No wrinkling / No yellowing / No bubble formation, even with thicker layers / Efficient working thanks to fast drying even at low temperatures (5 °C), thus fast masking and higher productivity. Approval Type «W» (chemical industry approval) according to BN 108/109 in the systems «WBZ» and «WBR».