Knuchel Farben
Parent company with production and development for the areas of building protection, wood as well as automotive and industrial coatings.
COLORAMA
These are the sales outlets of Knuchel Farben AG throughout Switzerland. Here you can find out more about the range of services and opening hours.
4
Wear protection

4.4    2K Primer

2011 CORODUR
2K-FH repair and filling putty
CORODUR 2K-FH repair and filling putty is a solvent-free, mechanically high-quality polyurethane elastomer consisting of two storage-stable but highly reactive raw material components. The consistency of the product is formulated in such a way that it can be applied in thick layers with a spatula.
Further information
2048 CORODUR
2K-primer reddish
CORODUR 2K-primer reddish is an adhesion promoter and is primarily used in combination with the polyurea-based CORODUR systems. It improves their bond to metallic substrates. The rapid drying process enables rational system processing.
Further information

4.5    2K Middle coat

2014 CORODUR FLEX 80
2K-PUA intermediate coating
Further information

4.6    2K Top coat

2013 CORODUR SV 90 POLY
2K-wear protection
CORODUR SV 90 POLY is a mechanically high-quality, highly elastic polyurea elastomer, which is produced/applied by spraying with a 2K Airless high-pressure spraying system or with the MixCoat™ spray system both components are solvent-free (<5%).
Further information
2015 CORODUR TOP 98
2K-PUA finishing coating
Further information
2054 CORODUR TOP
75/80 2K-PUA coating
Further information
2055 CORODUR HT 40 POLY
2K-wear protection THIX
Further information
2056 CORODUR HT 40 POLY
2K-wear protection
Further information
2101 COROPUR NonAbrasive
2K-FH finishing coating
COROPUR NonAbrasive is a tough elastic, highly abrasion resistant coating material. Particularly suitable for internal coating and thus long-term corrosion protection of pressure pipes and other steel surfaces. COROPUR NonAbrasive is characterized by low water and water vapor diffusion. Allows thick layer application up to 400 µm even on vertical surfaces. Gloss and UV-resistant coatings are achieved with the correspondingly resistant variant COROPUR NonAbrasive 2K-FH finishing coating LS.
Further information
2106 COROPUR NonAbrasive
2K-FH finishing coating LS
COROPUR NonAbrasive is a combination of moisture-curing (FH) polyisocyanates. COROPUR NonAbrasive is, comparable to the usual 2-component epoyy- or polyurethane tar coating materials, particularly suitable for the long-term corrosion protection of all steel surfaces. It is particularly characterized by high abrasion resistance, chemical resistance and low water and water vapour diffusion. The light and weather resistance is good even in high sunlight. This enables its use in industrial, marine and alpine climates.
Further information
2112 COROPUR NonAbrasive
2K-FH finishing coating RHK 11
COROPUR NonAbrasive 2K-FH finishing coating RHK 11 is a moisture-curing 1-component polyurethane resin coating with an anti-slip surface structure. The system is equipped with fillers, which give the surface an appropriate roughness, which leads to the anti-slip properties.
The coating achieves a coefficient of friction µ > 0.45 according to DIN 51151. This results in the rating GS3 in the footwear area and GB2 in the barefoot area. According to the «Assessment of slip hazards under operating conditions» published by the German Social Accident Insurance, the coating achieves the highest rating of «safe, falls unlikely». The resulting anti-slip properties depend on the nature of the substrate and the application quantity.
COROPUR NonAbrasive 2K-FH finishing coating RHK 11 is particularly characterized by high abrasion resistance and chemical resistance. The light and weather resistance is good even in high sunlight.
Further information
2123 COROPUR NonAbrasive
2K-FH finishing coating RHK 12/13
COROPUR NonAbrasive 2K-FH finishing coating RHK 12/13 is a moisture-curing 1-component polyurethane resin coating with an anti-slip surface structure. The system is equipped with fillers, which give the surface an appropriate roughness, which leads to the anti-slip properties.
The coating achieves a coefficient of friction µ > 0.60 according to DIN 51151. This results in the rating GS4 in the footwear area and GB3 in the barefoot area. According to the «Assessment of slip hazards under operating conditions» published by the German Social Accident Insurance, the coating achieves the highest rating of «safe, falls unlikely». The resulting anti-slip properties depend on the nature of the substrate and the application quantity.
COROPUR NonAbrasive 2K-FH finishing coating RHK 12/13 is particularly characterized by high abrasion resistance and chemical resistance. The light and weather resistance is good even in high sunlight.
Further information